Detailed Photos
Loading Table The loading table is composed of rubber-covered rollers and Kevlar rope. When the glass is put onto the rollers, the glass will be conveyed automatically to the entrance of the furnace where it will be in ready-to-enter-furnace position and the rollers stop moving. It will send the glass into the furnace once the computer control system gives enter command.
Heating Section The structure of the heating section is of a double-layer box type covered with thermos-insulation material. Inside the section there is a conveyor system with high temperature resistant ceramic rollers. Heating elements and radiation plates are installed on the upper layer and lower layer of this section. The upper layer radiation plate is special heat resistant and anti-corrosion cast material. The heating element is of an integrated part with spiral type resistance erected on ceramic part, it's easy to replace. When the glass is going to enter the furnace, the front door of the heating section opens the rolls of the loading table and heating section move at the same time. When the glass is in the furnace, the front door will close and the glass on the rollers will be moved back and forth at the distance calculated by the controlling system automatically, so that the glass will be heated evenly. The upper section can be lifted up for maintenance. The heating elements are in matrix layout. Packaging & Shipping
| Model | STG-A2442-5 |
| Flat Glass size | Max loading area | 2440 x 4220mm |
| Glass thickness range | 5 -19mm |
| Max glass size | 2440 x 4220mm 5-19mm glass |
| Min Glass size | 400x400mm |
Recommended
transformer capacity | ≥680KVA |
| Blower Control | controlled by frequency inverters |
| Quality Standard | ANSI Z97.1-2004, |
| Finished product rate | ≥ 98% |
| Installation period (approximately,) | 15 working days |
| Commissioning period (approximately) | 7 working days |
| Training period (approximately) | 1 ( one ) working week |
| Guarantee period | ONE year for non worn-out parts and components. |
| Power supplier mode | 380 V + 50 HZ |
Company Profile
After Sales Service
